August 22, 2012

IFM DESIGN/ BUILDS ZINC AND COPPER REMOVAL SKID FOR...

Water - August 22, 2012 -- IFM recently assisted a large tire and rubber manufacturer with issues associated with years of corrosion occurring in facilities’ cooling tower system. Due to the corrosion in the cooling tower...
October 25, 2012

IFM RETROFITS OLD DAF INTO NEW INSTALLATION

Wastewater - October 25, 2012 -- IFM recently took part in a design/build project for a Northwest Ohio based food manufacturing company. The company contracted IFM to provide process and permit engineering along with project manageme...
November 7, 2012

IFM ASSISTS LARGE DATA CENTER WITH GLYCOL REMOVAL FROM...

Wastewater - November 7, 2012 -- IFM was approached by a very large banking data center to reduce the volume hauled from the disposal of 30% Ethylene Glycol from a 10,000 gallon chiller loop, by way of membrane filtration. Due to...
November 9, 2012

IFM UPGRADES TRAVEL CENTER WATER SYSTEM WITH...

Water - November 9, 2012 -- A longtime customer of IFM often experienced issues with its water system with short well pump life and pressure problems. The problems stemmed from very large pressure tanks becoming water logged an...
January 14, 2013

IFM REPLACES RETENTION TANKS AND SOFTENERS WITHOUT...

Wastewater - January 14, 2013 -- Industrial Fluid Management, Inc. was hired by National Travel Center to replace seven steel retention tanks and re-bed two softener units for their Public Water System, in Central Ohio. The retention...
April 24, 2013

COLD WEATHER NITRIFICATION CASE STUDY

Water - April 24, 2013 -- Low temperatures can have dramatic effects on a microbial community. When this happens it is important to have a microbial community that consists of microbes that are effective at removing organics a...
April 24, 2013

SIGNIFICANTLY REDUCE YOUR EFFLUENT AMMONIA

Water - April 24, 2013 -- Ammonia removal is one of the most important and difficult processes to maintain in wastewater treatment plants. It can be impacted by various environmental factors, shock loading, toxicity, and solid...
June 19, 2013

IFM UTILIZES GIM 1008 TO IMPROVE PHENOL TREATING...

Wastewater - June 19, 2013 -- Due to Ohio EPA Operator of Rule Regulations, IFM has been assisting a Northwest Ohio Phenolic Resin manufacturer with daily operations of its NPDES permitted waste- water treatment...