April 9, 2020
A returning customer reached out to IFM to design, fabricate and install a complete water treatment system.
July 18, 2019
An opportunity arose to connect to a city water source at a facility being operated by IFM. The facilities current water supply came from an on-site well and required treatment prior to use.
June 20, 2019
In July, IFM took over operations of a long-standing clients’ facility. While completing on-site background investigations on the treatment system, IFM discovered that there were a few deficiencies, one of them being a possible water logged bladder tank...
May 6, 2019
A National Travel Center client solicited IFM to design, install, and operate both a water and wastewater system for its new facility in Florida (5,000-10,000 gallons per day)...
January 19, 2019
IFM recently finished implementing a large-scale water system for an industrial client. Upon completion of the water system, this same client’s existing wastewater treatment system took a turn for the worse...
November 2, 2018
Municipal Wastewater - IFM was contacted by a long-term client regarding a facility that was having compliance issues. They were particularly struggling with was their ammonia limit. The waste stream at this facility is primarily composed...
August 8, 2018
A National Travel Center contacted IFM regarding an existing wastewater treatment facility that needed some upgrades. The existing facility, rated for 20,000 gallons per day (GPD), was currently meeting limits but the plant was deteriorating. The plant was an...
July 23, 2018
Commercial Water Treatment System - In the fall of 2016, IFM was contacted by a competitive horse farm in Michigan to help with the treatment of their well water. The farm land was on an old salt mine, so the ground water had an extreme amount of salt...
July 23, 2018
Industrial WTP - A Detroit, Michigan paint coating facility added another facility in Jeffersonville, Indiana. This company approached IFM to design and fabricate two complete water treatment systems for the facility coating and washing...
July 23, 2018
Municipal Wastewater - In the summer of 2016, IFM was approached by an existing client to maintain sewage flow at a facility near Valparaiso, IN. This client has regular, high flow with a large amount of debris in it. This debris was plugging the...
July 23, 2018
Municipal Water - In late 2016, a city in the Dayton area contacted IFM about water pressure issues within their distribution lines. A factory that is on their water line is not receiving enough water pressure to support the fire suppression pumps for their facility...
July 23, 2018
Municipal Water - A long standing operational client of IFM contacted them to aid in some issues with two facilities. These two facilities specifically have high sulfur content in their wells, enough to cause drastic fluctuation in chlorine residuals, resulting...
July 23, 2018
Municipal Wastewater - Contacted by a local village, IFM was asked to remove and replace their existing diffuser system in one of their sludge holding tanks in the wastewater treatment facility. To complete this project most effectively, IFM decided...
July 23, 2018
Municipal Wastewater - A village in Northwest Ohio contacted IFM to aid in upgrades to a clarifier in their existing wastewater treatment plant. The village administrator requested installation of RAS (return activated sludge) and...
July 23, 2018
Municipal Wastewater - In late spring of 2016, IFM was contacted by a local village to aid in renovations to their existing lift station. An IFM technician made a site visit with village administration to determine what they deemed necessary as upgrades...
July 23, 2018
Municipal Water - IFM designed an oxidation-filtration treatment system to remove the rust-staining contaminant. The full-scale Iron removal system...
January 23, 2017
Industrial WWTP - January 2017 -- IFM assisted a local automotive foundry to evaluate current means of wastewater treatment conditions and methods. From Summer 2015 to December 2015, IFM completed an evaluation that consisted...
November 23, 2016
Industrial WWTP - November 2016 -- An international meat production company approached IFM with the task of cleaning up the waste stream in their blue leather tannery facility found in the Panhandle of Texas...
October 24, 2016
Industrial WWTP - October 2016 -- IFM assisted a local automotive foundry to evaluate current means of wastewater treatment conditions and methods. From Summer 2015 to December 2015, IFM completed an evaluation that consisted...
June 29, 2016
Wastewater - June 29, 2016 -- A long-time client of IFM was having difficulty meeting NPDQES regulations caused by their high effluent CBOD levels. These levels were able reach upwards of 200 mg/L with a permit level of 25 mg/L. T...